【SparkFun】の商品一覧
研究用総合機器
-
計測
-
実験用素材
-
研究用配管材（液体・気体）
-
開発・試作支援
-
電子／電気部品・制御機器
-
IT関連・DX支援
-
文具・事務用品
物流・製造現場用品
-
生産加工用品
看護・医療・介護
-
感染予防・個人防護具
文具・オフィス用品
-
オフィス用品
IT関連・DX支援
-
IoT製品・自動化装置・ロボット
-
SparkFun MicroMod Environmental Function Board SEN-18632
Description
The SparkFun MicroMod Environmental Function Board adds additional sensing options to the MicroMod Processor Boards. This Function Board includes three sensors to monitor air quality（SGP40）, humidity temperature（SHTC3）, and CO2 concentrations（STC31）in your indoor environment. To make it even easier to use, all communication is over the MicroMod's I2C bus！1種類の製品があります
標準価格：45,700円
WEB価格：
-
SparkFun Thing Plus - RP2040 DEV-17745
Description
The SparkFun Thing Plus - RP2040 is a low-cost, high performance board with flexible digital interfaces featuring the Raspberry Pi Foundation's RP2040 microcontroller. Besides the Thing Plus or1種類の製品があります
標準価格：6,790円
WEB価格：
-
SparkFun Pro Micro - RP2040 DEV-18288
Description
The SparkFun Pro Micro RP2040 is a low-cost, high performance board with flexible digital interfaces featuring the Raspberry Pi Foundation's RP2040 microcontroller. Besides the good 'ol Pro Micro footprint, the board also includes a WS2812B addressable LED, boot button, reset button, Qwiic connector, USB-C, resettable PTC fuse, and castellated pads.1種類の製品があります
標準価格：4,550円
WEB価格：
-
SparkFun Environmental Sensor Breakout - BME680 （Qwiic） SEN-16466
Description
The SparkFun BME680 Environmental Sensor is a breakout that combines a gas sensor with temperature, humidity and barometric pressure sensing for a complete environmental sensor in a single package. The gas sensor on the BME680 can detect a wide variety of volatile organic compounds（or VOC for short）to monitor indoor air quality. Combine that with precise temperature, humidity, and barometric pressure and the BME680 can work as a completely standalone environmental sensor all in a 1in.×1in. breakout！1種類の製品があります
標準価格：8,520円
WEB価格：
-
SparkFun RTK Surveyor GPS-18443
Description
The SparkFun RTK Surveyor is an easy to use GNSS receiver for centimeter-level positioning. Perfect for surveying, this preprogrammed device can also be used for autonomous driving, navigation, asset tracking and any other application where there is a clear view of the sky. The RTK Surveyor can also be used as a base station. With the flick of a switch, two RTK Surveyors can be used to create an RTK system capable of 14mm horizontal positional accuracy. The built-in Bluetooth®connection via an ESP32 WROOM enables the user to use the RTK Surveyor with their choice of GIS application on a phone or tablet. The built in battery allows field use for up to four hours and is compatible with common USB battery banks.1種類の製品があります
標準価格：130,000円
WEB価格：
-
SparkFun GPS Breakout - Chip Antenna, SAM-M8Q （Qwiic） GPS-15210
Description
The SparkFun SAM-M8Q GPS Breakout is a high quality GPS board with equally impressive configuration options. The SAM-M8Q is a 72-channel GNSS receiver, meaning it can receive signals from the GPS, GLONASS, and Galileo constellations. This increases precision and decreases lock time and thanks to the onboard rechargable battery, you'll have backup power enabling the GPS to get a hot lock within seconds！ Additionally, this u-blox receiver supports I2C（u-blox calls this Display Data Channel）which made it perfect for the Qwiic compatibility so we don't have to use up our precious UART ports. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.1種類の製品があります
標準価格：13,700円
WEB価格：
-
SparkFun Cryptographic Co-Processor Breakout - ATECC608A （Qwiic） DEV-18077
Description
Product Restrictions：To access certain features of the ATECC608A, users will need to contact Microchip and sign an NDA contract to obtain the complete datasheet. Due to the required NDA - technical support, an Arduino library, and hookup guide are not provided for users on this product.1種類の製品があります
標準価格：1,590円
WEB価格：
-
SparkFun Thing Plus - STM32 DEV-17712
Description
With a 32-bit ARM®Cortex®-M4 RISC core, the SparkFun STM32 Thing Plus brings power and precision to your projects. The STM32 Thing Plus provides you with an economical and easy to use development platform if you're needing more power with a minimal working space. This Thing comes flashed with the DFU bootloader, and to make the Thing Plus even easier to use, we've moved a few pins around to make the board Feather compatible. In addition, it utilizes our handy Qwiic Connect System which means no soldering or shields are required to connect it to the rest of your system！1種類の製品があります
標準価格：14,800円
WEB価格：
-
SparkFun GPS-RTK2 Board - ZED-F9P （Qwiic） GPS-15136
Description
With GPS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better！ GPS Real Time Kinematics（RTK）has mastered dialing in the accuracy on their GPS modules to to just millimeters, and that's why we had to put it on this board！1種類の製品があります
標準価格：83,900円
WEB価格：
-
SparkFun High Precision Temperature Sensor - TMP117 （Qwiic） SEN-15805
Description
The SparkFun Qwiic TMP117 breakout is a high precision temperature sensor equipped with an I2C interface. It outputs temperature readings with high precision of ±0.1℃ across the temperature range of -20℃ to +50℃s with no calibration and a maximum range from -55℃ to 150℃. The SparkFun High Precision Temperature Sensor also has a very low power consumption rate which minimizes the impact of self-heating on measurement accuracy. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.1種類の製品があります
標準価格：4,960円
WEB価格：
-
SparkFun MicroMod Asset Tracker Carrier Board DEV-17272
Description
Note - Please read before purchasing！：The MicroMod Asset Tracker uses the "00B" product version of the SARA-R5 module（specifically the SARA-R510M8S-00B-00）. LTE NB-IoT Radio Access Technology, and the LTE FDD bands：66, 71, 85 are not supported by this version. Refer to the SARA-R5 datasheet for more information.1種類の製品があります
標準価格：44,200円
WEB価格：
-
SparkFun 16x2 SerLCD - RGB Backlight （Qwiic） LCD-16396
Description
The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 Black on RGB Liquid Crystal Display into your project. We've seriously overhauled the PCB design on the back of the screen by including an ATmega328P that handles all of the screen control, meaning a backpack is no longer needed！ This display can now communicate in three different ways：serial, I2C, and SPI. This version comes equipped with a Qwiic connector, bringing serial LCDs into the Qwiic ecosystem. This simplifies the number of wires needed and allows your project to display all kinds of text and numbers.1種類の製品があります
標準価格：11,200円
WEB価格：
-
SparkFun Qwiic Twist - RGB Rotary Encoder Breakout DEV-15083
Description
The SparkFun Qwiic Twist is a digital RGB rotary encoder breakout that is also able to connect to our Qwiic Connect System. The Twist takes care of all the various interrupts, switches, PWM'ing of LEDs, and presents all those features over an easy-to-use I2C interface. The Qwiic Twist was designed to get rid of the large mass of wires that are needed to implement an RGB encoder in a breadboard enabling you to stop messing around with interrupt debugging and get back to your project！ Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.1種類の製品があります
標準価格：7,470円
WEB価格：
-
SparkFun MicroMod Artemis Processor DEV-16401
Description
Leveraging the ultra powerful Artemis Module, the SparkFun MicroMod Artemis Processor is the brain board of your dreams. With a Cortex-M4F with BLE 5.0 running up to 96MHz and with as low power as 6uA per MHz（less than 5mW）, the M.2 MicroMod connector allows you to plug in a MicroMod Carrier Board with any number of peripherals. Let's have a look at what this processor board has to offer！ If you need Machine Learning capabilities, Bluetooth, I2C functionality to connect to all our amazing Qwiic boards, and more the Artemis Processor is the perfect choice for your MicroMod Carrier Board.1種類の製品があります
標準価格：6,290円
WEB価格：
-
SparkFun GPS Dead Reckoning Breakout - NEO-M8U （Qwiic） GPS-16329
Description
The SparkFun NEO-M8U GPS Breakout is a high quality GPS board with equally impressive configuration options. The NEO-M8U takes advantage of u-blox's Untethered Dead Reckoning（UDR）technology. The module provides continuous navigation without needing to make any electrical connection to a vehicle, thus reducing cost of installation for after-market dead reckoning applications.1種類の製品があります
標準価格：25,100円
WEB価格：
-
Himax CMOS Imaging Camera - HM01B0 SEN-15570
Description
The HM01B0 from Himax Imaging is an ultra low power CMOS Monochrome Image Sensor that enables the integration of an "Always On" camera for computer vision applications such as gestures, intelligent ambient light and proximity sensing, tracking and object identification. The sensor allows the sensor to consume very low power of ＜2mW at QVGA 30FPS. This low power consumption and vision applications camera comes with a ribbon cable that mates to the camera connector populated on the following products：MicroMod Machine Learning Carrier Board1種類の製品があります
標準価格：3,780円
WEB価格：
-
SparkFun GPS Breakout - NEO-M9N, SMA （Qwiic） GPS-17285
Description
The SparkFun NEO-M9N GPS Breakout is a high quality GPS board with equally impressive configuration options including SMA. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive signals from the GPS, GLONASS, Galileo, and BeiDou constellations with ～1.5 meter accuracy. This breakout supports concurrent reception of four GNSS. This maximizes position accuracy in challenging conditions increasing, precision and decreases lock time; and thanks to the onboard rechargeable battery, you'll have backup power enabling the GPS to get a hot lock within seconds！ Additionally, this u-blox receiver supports I2C（u-blox calls this Display Data Channel）which makes it perfect for the Qwiic compatibility so we don't have to use up our precious UART ports. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.1種類の製品があります
標準価格：23,700円
WEB価格：
-
SparkFun Cryptographic Co-Processor Breakout - ATECC508A （Qwiic） DEV-15573
Description
The SparkFun ATECC508A Cryptographic Co-Processor Breakout allows you to easily add strong authentication security to your IoT node, edge device, or embedded system. It includes two Qwiic ports for plug and play functionality. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard. The ATECC508A chip is capable of many cryptographic processes, including, but not limited to：Creating and securely storing unique asymmetric key pairs based on Elliptic Curve Cryptography（FIPS186-3）.1種類の製品があります
標準価格：2,740円
WEB価格：
-
SparkFun MicroMod ATP Carrier Board DEV-16885
Description
Access all the pins（i.e. ATP）of the MicroMod Processor Boards with the SparkFun MicroMod ATP Carrier Board！ This board breaks out the MicroMod Processor Board's pins on the M.2 connector to 0.1" spaced female headers and PTH pads on the edge of the board. This Carrier Board is great if you're interested in testing out different MicroMod Processor Boards for your application.1種類の製品があります
標準価格：6,350円
WEB価格：
-
SparkFun 2D Barcode Scanner Breakout SEN-18088
Description
The SparkFun 2D Barcode Scanner Breakout is a nifty little breakout board featuring the DE2120 barcode scanner module from DYScan. The DE2120 reads 20 different barcode symbologies（both 1D and 2D）using a camera coupled with on-board image processing to identify and decode everything from UPC codes to QR codes. The module also features two LEDs：one for illumination and one to project the red line that you're used to seeing from laser-based scanners.1種類の製品があります
標準価格：21,400円
WEB価格：
-
SparkFun RedBoard Plus DEV-18158
Description
At SparkFun we continually like to innovate, update, and improve even when it comes to our very own development boards. The SparkFun RedBoard Plus is an Arduino-compatible development board that has everything you need in an Arduino Uno with many extra perks. The best part about the RedBoard Plus is that it utilizes our handy Qwiic Connect System which means no soldering or shields are required to connect it to the rest of your system！1種類の製品があります
標準価格：9,780円
WEB価格：
-
SparkFun GPS Breakout - ZOE-M8Q （Qwiic） GPS-15193
Description
The SparkFun ZOE-M8Q GPS Breakout is a high accuracy, miniaturized, GPS board that is perfect for applications that don't possess a lot of space. The on-board ZOE-M8Q is a 72-channel GNSS receiver, meaning it can receive signals from the GPS, GLONASS, BeiDou, and Galileo constellations. This increases precision and decreases lock time and thanks to the onboard rechargable battery you'll have backup power enabling the GPS to get a hot lock within seconds！ Additionally, this u-blox receiver supports I2C（u-blox calls this Display Data Channel）which made it perfect for the Qwiic compatibility so we don't have to use up our precious UART ports. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.1種類の製品があります
標準価格：15,900円
WEB価格：
-
SparkFun GPS Breakout - NEO-M9N, Chip Antenna （Qwiic） GPS-15733
Description
The SparkFun NEO-M9N GPS Breakout with on-board chip antenna is a high quality GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive signals from the GPS, GLONASS, Galileo, and BeiDou constellations witn ～1.5 meter accuracy. This breakout supports concurrent reception of four GNSS. This maximizes position accuracy in challenging conditions, increasing precision and decreases lock time; and thanks to the onboard rechargeable battery, you'll have backup power enabling the GPS to get a hot lock within seconds！ Additionally, this u-blox receiver supports I2C（u-blox calls this Display Data Channel）which made it perfect for the Qwiic compatibility so we don't have to use up our precious UART ports. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.1種類の製品があります
標準価格：23,700円
WEB価格：
-
SparkFun 20x4 SerLCD - RGB Backlight （Qwiic） LCD-16398
Description
The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 20x4 Black on RGB Liquid Crystal Display into your project. We've seriously overhauled the PCB design on the back of the screen by including an ATmega328P that handles all of the screen control, meaning a backpack is no longer needed！ This display can now communicate in three different ways：serial, I2C, and SPI. This version comes equipped with a Qwiic connector, bringing serial LCDs into the Qwiic ecosystem. This simplifies the number of wires needed and allows your project to display all kinds of text and numbers.1種類の製品があります
標準価格：14,800円
WEB価格：
-
SparkFun Inventor's Kit Guidebook - v4.1a BOK-15884
Description
The full-color SparkFun Inventor's Kit Guidebook V4.1a contains step by step instructions with circuit diagrams and hookup tables for building each project and circuit. Full example code is provided, new concepts and components are explained at point of use, and troubleshooting tips offer assistance if something goes wrong. Once you make your way through all of the example circuits you will have a much better grasp on programming electronics！1種類の製品があります
標準価格：2,070円
WEB価格：
-
Alchitry Au+ FPGA Development Board （Xilinx Artix 7） DEV-17514
Description
The Alchitry Au+ is the "gold" standard for FPGA development boards and it's possibly one of the strongest boards of its type on the market. The Au+ substitutes a more robust scalable FPGA chip（Xilinx XC7A100T）that allows for more complex application circuits. The number of Configurable logic blocks（LABs/CLBs）, Logic Elements, and total RAM bits are all nearly 3x that of the standard Au; see "Features" for more details.1種類の製品があります
標準価格：107,000円
WEB価格：
-
SparkFun Distance Sensor Breakout - 4 Meter, VL53L1X （Qwiic） SEN-14722
Description
This SparkFun Distance Sensor Breakout utilizes the VL53L1X next generation ToF（Time of Flight）sensor module to give you the highly accurate measurements at long ranges for its size. The VL53L1X from STMicroelectronics uses a VCSEL（Vertical Cavity Surface Emitting Laser）to emit an Infrared laser to time the reflection to the target. That means that you will be able to measure the distance to an object from 40mm to 4m away with millimeter resolution！ To make it even easier to get your readings, all communication is enacted exclusively via I2C, utilizing our handy Qwiic system so no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.1種類の製品があります
標準価格：8,760円
WEB価格：
-
SparkFun Qwiic Scale - NAU7802 SEN-15242
Description
The SparkFun Qwiic Scale is a small breakout board for the NAU7802 that allows you to easily read load cells to accurately measure the weight of an object. By connecting the board to your microcontroller you will be able to read the changes in the resistance of a load cell and, with some calibration, you'll be able to get very accurate weight measurements. This can be handy for creating your own industrial scale, process control or simple presence detection. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.1種類の製品があります
標準価格：5,740円
WEB価格：
-
SparkFun Photodetector Breakout - MAX30101 （Qwiic） SEN-16474
Description
The SparkFun Photodetector Breakout is an updated version of the SparkFun Particle Sensor Breakout includes the MAX30101, a highly sensitive optical sensor and successor to the MAX30105 and MAX30102. The MAX30101 Breakout utilizes a photon detector to measure the amount of returning light that is reflected back from the LEDs. This is useful for various applications like particle（1種類の製品があります
標準価格：11,400円
WEB価格：
-
TFMini-S - Micro LiDAR Module SEN-16977
Description
The TFMini-S Micro LiDAR Module is a ToF（Time of Flight）LiDAR sensor capable of measuring the distance to an object as close as 10 centimeters（+/- 6cm up to 6m）and as far as 12 meters（+/-1％ starting at 6m）！ As with all LiDAR sensors, your effective detection distance will vary depending on lighting conditions and the reflectivity of your target object, but what makes this sensor special is its size. Measuring only 42x15x16mm, the TFMini-S allows you to integrate LiDAR into applications traditionally reserved for smaller sensors.1種類の製品があります
標準価格：24,500円
WEB価格：
-
SparkFun 6 Degrees of Freedom Breakout - LSM6DSO （Qwiic） SEN-18020
Description
The SparkFun LSM6DSO 6 Degrees of Freedom Breakout is an accelerometer and gyroscope sensor with a giant 9kB FIFO buffer and embedded processing interrupt functions. Due to the capabilities and low cost of the LSM6DSO we've created this small breakout board just for you！ Each LSM6DSO breakout has been designed to be super-flexible and can be configured specifically for many applications. With the LSM6DSO breakout you will be able to detect shocks, tilt, motion, taps, count steps, and even read the temperature！1種類の製品があります
標準価格：5,270円
WEB価格：
-
SparkFun 16x2 SerLCD - RGB Text （Qwiic） LCD-16397
Description
The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 RGB on Black Liquid Crystal Display into your project. We've seriously overhauled the PCB design on the back of the screen by including an ATmega328P that handles all of the screen control, meaning a backpack is no longer needed！ This display can now communicate in three different ways：serial, I2C, and SPI. This comes equipped with a Qwiic connector, bringing serial LCDs into the Qwiic ecosystem. This simplifies the number of wires needed and allows your project to display all kinds of text and numbers.1種類の製品があります
標準価格：11,200円
WEB価格：
-
SparkFun Qwiic OpenLog DEV-15164
Description
The SparkFun Qwiic OpenLog is the smarter and better looking cousin to the extremely popular OpenLog but now we've ported the original serial based interface to I2C！ Thanks to the added Qwiic connectors, you can daisy chain multiple I2C devices and log them all without taking up your serial port. The Qwiic OpenLog can store, or "log", huge amounts of serial data and act as a black box of sorts to store all the data that your project generates, for scientific or debugging purposes. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.1種類の製品があります
標準価格：6,540円
WEB価格：
-
Arduino Nano Every DEV-15590
Description
Turn your ideas into a reality quickly with the new Arduino Nano Every1種類の製品があります
標準価格：5,740円
WEB価格：
-
SparkFun Inventor's Kit for Arduino Uno - v4.1 KIT-15631
Description
The SparkFun Inventor's Kit（SIK）for Arduino Uno is a great way to get started with programming and hardware interaction with the Arduino programming language. The SIK includes everything you need to complete five overarching projects consisting of 16 interconnected circuits that teach everything from blinking an LED to reading sensors. The culminating project is your very own autonomous robot！ No previous programming or electronics experience is required to use this kit.1種類の製品があります
標準価格：35,200円
WEB価格：
-
FLIR Lepton 2.5 - Thermal Imaging Module SEN-16465
Description
The FLIR Lepton®2.5 - Thermal Imaging Module is a radiometric-capable long wave infrared（LWIR）camera solution that is smaller than a dime, fits inside a smartphone, and is less expensive than traditional IR cameras. With a focal plane array of 80x60 active pixels, this Lepton easily integrates into native mobile-devices and other electronics as an IR sensor or thermal image sensor. The radiometric Lepton captures accurate, calibrated, and non-contact temperature data in every pixel.1種類の製品があります
標準価格：69,400円
WEB価格：
-
Shapeoko 4 XL - Hybrid Table, No Router TOL-18451
Description
Please note, these machines are built to order have an estimated lead time of 4 business days before shipping1種類の製品があります
標準価格：774,000円
WEB価格：
-
Shapeoko 4 XXL - Hybrid Table, No Router TOL-18455
Description
Please note, these machines are built to order have an estimated lead time of 4 business days before shipping1種類の製品があります
標準価格：864,000円
WEB価格：
-
RockBLOCK 9603N - Iridium SatComm Module WRL-14498
Description
The RockBLOCK 9603N allows you to send and receive short messages from anywhere on Earth with a clear view of the sky. It works far beyond the reach of WiFi and GSM networks. Maybe you want to transmit weather information from mid-ocean? Or use it to control your robot in the middle of the desert? Perhaps you need to communicate in an emergency, when other networks might not be available? RockBLOCK can help.1種類の製品があります
標準価格：102,000円
WEB価格：
-
PureThermal Mini Pro JST-SR （with FLIR Lepton 3.5） DEV-17544
Description
The new PureThermal Mini Pro JST-SR with Thermal by FLIR is a hackable thermal camera for the FLIR Lepton thermal imaging camera core. Just like its PureThermal 2 predecessor, it ships pre-configured to operate as a plug-and-play UVC 1.0 USB thermal webcam that will work with standard webcam and video apps on all major platforms using a JST-SR to USB Cable, or your own custom cable. For developers, its reference firmware and viewer software are open source.1種類の製品があります
標準価格：137,000円
WEB価格：